176 the world's first 0.8mm (.031") pitch wire- to-board insulation displacement connector. only 3.9mm (.154") depth and 1.75mm (.069") height after mounting on the pc board. compared to the conventional 1.0mm (.039") pitch ssr connector, occupation space on the board is reduced by 34%. features ? 3-point grip construction the 3-point insulation grip feature and the strain relief ensure a firm grip on terminated wires and protection of the insulation displacement connection from possible damage. super fine wires are applicable applicable wire is of awg #32 with only 0.38mm (.015") o.d. with this super fine wire, routing of wires is easy." shrouded header the header is fully shrouded, but remains thin. twin u-slot insulation displacement section the insulation displacement section connected to each wire consists of two tin-plated slots (twin u-slots), which ensures reliable connection. specifications ?current rating: 0.5a ac, dc (awg #32) ?voltage rating: 30v dc ?temperature range: -25?c to +85?c(including temperature rise in applying electrical current) ?contact resistance: initial value/20m ? max. after environmental testing/40m ? max. ?insulation resistance: 100m ? min. ?withstanding voltage: 200v ac/minute ?applicable wire: awg #32 conductor/7 strands, tin-coated copper alloy insulation o.d./0.38mm (.015") * contact jst for details. sur connector disconnectable insulation displacement connectors 0.8mm (.031") pitch idc emboss tape
177 sur connector receptacle h jst 5 0.8 (.031) 1.7(.067) 1.25(.049) 1.45(.057) 2.9(.114) 1.65(.065) 0.8 (.031) circuit no.1 a b ab 2 4 8 14 15 16 17 20 02sur-32s 04sur-32s 08sur-32s 14sur-32s 15sur-32s 16sur-32s 17sur-32s 20sur-32s 0.8(.031) 2.4(.094) 5.6(.220) 10.4(.409) 11.2(.441) 12.0(.472) 12.8(.504) 15.2(.598) 2.4(.094) 4.0(.157) 7.2(.283) 12.0(.472) 12.8(.504) 13.6(.535) 14.4(.567) 16.8(.661) 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 material and finish cir- cuits model no. dimensions mm(in.) q'ty / box contact: copper alloy, tin-plated housing: polyamide, ul94v-0, natural (ivory) shrouded header 0.2(.008) 0.8 (.031) 2.7(.106) 1.0 (.039) 1.0 (.039) 1.75(.069) a b 0.45(.018) circuit no.1 ab 2 4 8 14 15 16 17 20 sm02b-surs-tf sm04b-surs-tf sm08b-surs-tf sm14b-surs-tf sm15b-surs-tf sm16b-surs-tf sm17b-surs-tf SM20B-SURS-TF 0.8(.031) 2.4(.094) 5.6(.220) 10.4(.409) 11.2(.441) 12.0(.472) 12.8(.504) 15.2(.598) 3.8(.150) 5.4(.213) 8.6(.339) 13.4(.528) 14.2(.559) 15.0(.591) 15.8(.622) 18.2(.717) 3,500 3,500 3,500 3,500 3,500 3,500 3,500 3,500 material and finish dimensions mm(in.) q'ty / reel contact: copper alloy, copper-undercoated, tin/lead plated wafer: polyamide, ul94v-0, natural (ivory) solder tab: brass, copper-undercoated, tin/lead plated cir- cuits model no. note: the products listed above are supplied on embossed-tape. pc board layout (viewed from component side) and assembly layout 3.9(.154) 1.75(.069) header outline 0.8 0.1 (.031 .004) 0.5 0.1 (.020 .004) 1.0 0.1 (.039 .004) 2.3 0.1 (.091 .004) 1.7 0.1 (.067 .004) 0.35 0.1 (.014 .004) 1.2 0.1 (.047 .004) 0.7 0.1 (.028 .004) note: 1. tolerances are non-cumulative: 0.05mm(.002" ) for all centers. 2. dimensions above should serve as a guideline. contact jst for details.
sur connector 178 cover tape leader area carrier tape feeding direction feeding direction [80(3.150)dia.] cover tape carrier tape cover tape carrier tape tail tape 40(1.575)min. connector loaded area 400(15.748)min. lead tape 20 vacancies min. [13.0(.512)dia.] (w1 + .098 - .039 w1 + 2.5 - 1.0 ) 2.0 0.5 (0.79 .020) 330 2.0 (12.992 .079) dia. 1.55 0.05 (.061 .002)dia. 4.0 0.1 (.157 .004) 2.0 0.1 (.079 .004) 8.0 0.1 (.315 .004) 1.75 0.1 (.069 .004) f 0.1(.004) w 0.3(.012) 0.3 0.05 (.012 .002) 1.55 0.05 (.061 .002)dia. 4.0 0.1 (.157 .004) 2.0 0.1 (.079 .004) 1.75 0.1 (.069 .004) 8.0 0.1 (.315 .004) 0.3 0.05 (.012 .002) f 0.1(.004) s 0.1(.004) w 0.3(.012) taping specifications 2,4 8 14 to 17 20 fs w1 5.5(.217) 28.4(1.118) w 12( .472) 13.5( .531) 17.5( .689) 25.5(1.004) 33.5(1.319) 3,500 3,500 3,500 3,500 7.5(.295) 11.5(.453) 14.2(.559) 16( .630) 24( .945) 32(1.260) cir- cuits q'ty / reel taping dimensions mm(in.) reel dimensions mm(in.) note: 1. specifications conform to jis c 0806. the tape width, connector recess hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. specifications are subject to change without prior notice. (20 circuits) (2 to 17 circuits)
|
